5 Ways To Properly Clean Gold Plated Jewelry
Some gold jewelry enthusiasts choose gold plated jewelry because it is more practical and comes in a variety of styles and patterns. Furthermore, because gold-plated jewelry is inexpensive, many individuals use it to obtain a nice fashion style at a reasonable cost.
Gold plating is the technique of applying a thin layer of gold to another metal in order to give it a gold look. Although the coating may tarnish with time, you may have the item replaced by a jewelry specialist. This article discusses many techniques for cleaning gold-plated jewelry.
Ways to clean gold plated jewelry
- Cleaning Gold-Plated Jewelry After Wearing
After wearing gold-plated jewelry like Gold plated huggie hoop cz earring, wipe it down with a microfiber ball or a moist cotton ball to remove surface grime and smudges. You should clean the jewelry thoroughly if it has been exposed to acids, chlorine, alcohol, or sulfur compounds.
Before you begin cleaning, make sure you have warm water, dishwashing liquid, a small bowl, a jewelry cloth, a cotton ball, and a microfiber cloth on hand. Then, proceed with the cleaning procedure outlined below:
After wearing jewelry, it is common for it to pick up soil and body oils. As a result, you should wipe the gold-plated jewelry using a microfiber towel, jewelry cloth, or a moist cotton ball. Allow it to thoroughly dry before storing. If the gold-plated jewelry feels sticky or has apparent filth, clean it with a warm, soapy solution. In a small bowl, combine a cup of water and two drops of dishwashing liquid.
Put the gold-plated jewelry in the solution and soak it for about ten minutes, unless it has decorations like pearls, jewels, or enamel. To avoid scratches, clean only one or two parts at a time.
If the jewelry has intricately carved pieces, use a cotton swab to remove debris and grime from the little crevices. To remove the dirt, avoid using a sharp device such as a paper clip or a knife, since this may harm the gold plating. After cleaning your jewelry, rinse it with warm water. Then, rub it lightly with soft, lint-free fabric to restore shine.
- Cleaning Gold Plated Jewelry Using Dish Soap
Although regular tap water is OK, try using sodium-free seltzer water or club soda instead. The carbonation in these drinks can help release the accumulated dirt and debris.
Allow the jewelry to rest in the water for around 15 to 30 minutes. The warm and soapy water works on the cracks and gaps while it soaks. This loosens the hard-to-reach dirt buildups.
Scrub each piece of jewelry separately, paying special attention to holes and nooks that may trap undetected filth. Remember to use a gentle brush. The use of stiff brushes may harm or even remove the plating on your jewelry. If a certain crevice isn’t clearing up, use a Q-Tip and gently scrub it along the gaps.
Its helps to remove lingering dirt that has been loosened by the brush. Avoid using hot water, especially if the jewelry contains delicate stones. Prevent the water from running in a strong stream since it exerts a great deal of force on the jewel.
If you are rinsing the item in a sink, cover or stop the drain to avoid accidentally losing bits of jewelry as they slide from your hand. You may also rinse the jewelry with a metal coffee filter or a pasta strainer. Finally, lay the jewelry on a towel to completely dry before wearing or storing it.
- Cleaning Gold Plated Jewelry Using Ammonia
Although ammonia is a good cleanser, it may be chemically damaging. It would be preferable if you simply used ammonia as a cleanser on occasion to protect the jewelry, particularly the gold plate.
Make sure the jewelry is only in the ammonia mixture for a brief period of time. Ammonia is corrosive because it has a strong chemical base. Consider using a kitchen filter, similar to the one used when making pasta, to remove the jewels from the mixture all at once.
Turn the bowl over into a larger sieve or pluck the jewels out with a hand-held filter. To avoid losing any portion of the object if it slips from your hands, cover or stops the sink drain. You can also use the previous filter.
To avoid losing any valuable jewelry that falls out of your hand, plug or covers the sink’s drain. Place the jewelry on a towel to completely dry before wearing or storing it.
- Cleaning Jewelry Which Includes Glued-In Gemstone
Jewelry with gemstones cemented into its structure such as most earrings and Sterling silver eternity cz ring should not be submerged in water. This may eventually cause the jewels to come out, especially if you brush the jewelry vigorously.
It might be beneficial if you explored employing a separate cleaning procedure that does not require thorough immersion in water. Make a small batch of dish soap solution. Dab damp material onto the jewelry, being sure to soak up any leftover soap suds.
In this fashion, let the gold-plated jewelry dry. This allows the remaining moisture to drain and keeps it from seeping into the jewelry components.
- Using Boiling Water
When working with glued-in gemstones, you should also avoid boiling since it may cause the adhesive to loosen. Boiling, on the other hand, is great for cleaning very filthy gold-plated jewelry composed of solid gold.
Gold jewelry in a sturdy bowl or another container that will not be harmed by boiling water.
Arrange the jewels in a bowl or dish such that no item of jewelry covers another. Every jewelry item must be submerged in water. It would be preferable if you did not splash or spill the boiling water, as this might result in serious burns.
You can take your jewels if you can put your hands in the water. After removing the piece, use a gentle brush to clean each portion of the jewelry. Then wipe it with a gentle cloth and let it settle and air-dry completely. Boiling water slackens wax, filth, or grime, it may float on the water’s surface and signal that the jewelry has been fully cleaned.
Conclusion: How To Correct Cleaning Mistakes On Gold Plated Jewelry
If the jewelry remains dull after applying silver polish, toothpaste, or another cleaning, combine the water solution with the dishwashing solutions and immerse it for around five minutes. Wipe away the cleaner’s film using soft cotton material. It would be beneficial if you massaged the item smoothly to avoid losing the gold.
If there is severe damage and the metal becomes exposed after the gold plating has worn away, you may want to try replacing the gold. You should speak with a jeweler about the possibility and expense of replicating the item. Taking preventive measures to limit the damage is the greatest action you can do to retain the brilliance of your gold-plated jewelry.